If you are one of those users having trouble with Windows error code 0x80070035, you surely need help. The code signifies a mistake inside the internal network registries. Though there are several solutions to this problem, not all have been verified.
You must never try to use an unverified solution to this issue, or else you may end up screwing your computer and even its network card, or modem. To make it easy, you need to go through a few tips to properly solve the 0x80070035 error code in your computer’s registry. Here are some natural and tested methods that’ll surely resolve your problem:
Table of Contents
An Insight Into The Error Code 0x80070035
Users of Windows operating system, especially the Windows 7 and 8.1 versions often face this issue. It starts when the user tries to access windows vista through a newer version such as 8.1. Upon using these, the user may encounter the error code 0x80070035.
If you’ve used these versions of Windows, you might have experienced trouble accessing your internal network. In simple words, your operating system refuses to establish a networking path and shows the message “Error Code 0x80070035: The Network Path Was Not Found.” The problem is compounded by the fact that the OS even refuses to connect to any networking device including cable or wireless devices.
Users who often use sharing and are a part of a shared network face this problem quite frequently. Keep that all these methods have been tried and verified by users. These users claim to have encountered the same problem while connecting to a shared network. However complex the problem appears, there is always a solution to it. Luckily, you’ll find more than one ways of overcoming this error. Once you try and use these methods, your shared networking error will surely be put to the rest.
Perform the Checklist for fixing 0x80070035 Error
Just to be on the safe side, you must ensure that everything is in order; you must perform a checklist on your computer. Start checking by doing the following things:
- Make sure that the equipment system is set in the same workgroup.
- Your password and login ID exists on both systems.
- If you are using Vista or any later version of Windows, you must check if the file sharing function is enabled.
- Users of Vista or later OS must allow the network recovery function
- Make sure to disable all firewalls in your system
- Check all ports and see if any of the port is closed, if so, open it.
It is evident that the checklist ensures that you have all protocols enabled, and there is nothing wrong with your computer. Once the list is performed, move onto the next step which is performing the methods mentioned below to fix error code 0x80070035.
Method 1 – Disable Antivirus
If you are using the Windows 7 or 8.1 or 10 and have a third party antivirus software installed, make sure it is completely disabled.
Once done, reboot your system and see if the network path is established. In most cases, it is the third party antivirus and even firewall software that is the culprit. Disabling them may solve 0x80070035 Error on your System
Method 2- Disable unwanted Services
If the above method doesn’t resolve your networking issue, try this method.
- Move your cursor to the lower right side of your screen.
- Charm bar will appear, click on the search icon. Write “msconfig” in the dialog box without quotes.
- Once your system has finished the search, tap on the icon labeled as MSConfig. This will bring you to the system’s configuration window.
- Click on the Services tab in the upper part of the window.
- Now, check the box that is next to the “Hide all Microsoft services” icon. Click on the “Disable All” button and tap on the startup button.
- Once done, press the Ok button on the System Configuration window and reboot the system.
You now have access to your shared network but go through all the settings to ensure that your system is ready. There are many other methods to fix the error 0x80070035 code, but they are not as relevant as the ones you’ve just read.